来源：http://www.aoshangjk.com 发布时间：2019-07-09 浏览：次
1. Remove the lubricant pump.
2. Turn on the oil plug at the bottom of the machine base and put the lubricating oil in place.
3. Loosen the fastening bolt and separate the base from the pin gear.
4. Remove the shaft pin sleeve.
5. Remove the shield at the front end of the rotary arm and take out the cycloidal gear II.
6. Remove the rotary arm and its bearing assembly.
7. Remove barrier ring and cycloidal gear I.
8. When disassembling cycloidal gears, keep in mind the position of the cross-section symbol header.
Above is the introduction about the process of micro reducer disassembly. When disassembling, we should follow the precise sequence method to prevent the center from showing problems. If you have any questions, please call for consultation.
The exterior structure of micro-motor is the same as that of electromagnetic type. For example, rotating products are cylindrical and linear products are square. But the internal structure of micro-motor varies greatly because of its different working principles. From the exterior, we can see that high-quality micro-motor uses aluminium shell. Its main elements are as follows:
1. The use of aluminium shell can make the micro-motor lighter: because the weight of metal aluminium is lighter, the weight of the whole machine can be reduced relatively. Installation and transfer of convenience.
2. The heat dissipation of aluminium shell is very good: in the working condition, because of the high-speed operation, the high temperature demand of the micro motor itself can be released, we know that the heat dissipation ability of aluminium is strong, so now the micro motor manufacturers use aluminium shell as the shell of the motor.
The functions of all kinds of micro motors are very different, and their functional parameters are difficult to be elucidated differently. Usually, however, the use of aluminium enclosures in micro motors has the same elements and methods, and we can stop investigating from time to time in our lives.
The above wonderful content is supported by Shandong Micro Motor. There are many wonderful contents waiting for you to check. You are welcome to continue to pay attention to our website: http://www.aoshangjk.com. Looking forward to your attention!